Water Mist Nozzle

INTRODUCTION
Water Mist Fire fighting system is developed of fixed water-based local application fire fighting systems for use in category a machinery spaces. Water Mist Fire fighting system is designed and tested accordance with the IMO.MSC/Circ.913 & Fp 46/5/10 guidelines.
Water Mist Fire fighting system is designed and activated either by a press button switch on the main control panel and local control panel or automatically released by the signal from the fire detection system.

WATER MIST NOZZLE : T10

WATER MIST NOZZLE : K series

WATER MIST NOZZLE : K series

Water Mist fire fighting system is used and is activated when one compartment valve is opened. The high pressure pump will start the activated compartment valve with a water mist at a pressure of approximately 60 bar. Additional compartment valve can be activated, as required.Water Mist Fire fighting system is designed of the continuous operation time per the based on the protected area demanding the greatest volume of water is 20minutes. As piping system for Water Mist fire fighting system, we always use stainless steel piping in sizes calculated due to pressure drop calculations.